S&P COR-IND-M 1000 F Notice D'installation Et D'utilisation page 9

All manuals and user guides at all-guides.com
In models COR-IND-M 1000/12 and COR-
IND-M 1500/18, when the curtain is stopped
using the remote control (CR-30) in hot
mode, the resistances will stop and the fan
will continue operating for approximately 3
minutes with the aim of reducing the thermal
inertia of the resistances.
PROTECTION AGAINST OVERHEATING:
The COR-IND Air Curtains are fi tted with
one thermal f use which automatically
disconnects the unit in case of overheating.
In the event of this happening please contact
the offi cial S&P dealer in your area.
MAINTENANCE:
The COR-IND Air Curtains do not need any
special maintenance, but it is recommended
to keep the inlet and outlet grilles clean.
Clean them with a dry cloth (avoid using
solvents or abrasive detergents). Once a
year, the inside parts should be cleaned by
a qualifi ed electrician using compressed air
or a vacuum cleaner. In order to carry out
any maintenance tasks, the omnipolar cut-
off device must be activated to ensure that
none of the parts inside the apparatus are
live.
AFTER SALES SERVICE:
In the event of any problems with the unit, it
is advised to contact your S&P dealer. Any
manipulation of the appliance by personnel not
appointed by S&P will cancel the guarantee.
S&P reserves the right to modify the product
without prior notice.
9