Publicité
Les langues disponibles
Les langues disponibles
GB
If foam or liquid exits, switch off the
machine immediately.
Blow Function
Operation without the use of a filter
is recommended.
•
Connect the suction hose (19) to the
connecting blower (15) on the motor
head (3).
Cleaning/Maintenance
Pull out the mains plug.
Danger of electric shock.
Always check the appliance before
use for any obvious faults such as
a defective mains cable, and have
these repaired or replaced.
Cleaning the device
Never hose the device down with
water. Never use aggressive clean-
ing agents or solvents. This could
damage the appliance.
•
After use, empty the stainless steel con-
tainer (
9):
-
Opening the drain plug to allow the
vacuumed liquid to drain out (
10). A liquid residue remains in the
container.
To remove all residual liquids, fold
down the bow handle (1) and
take off the motor head (
the bow handle with the locking
levers (14), hold the stainless steel
container (9) with one hand on the
bow handle and the other on the
54
All manuals and user guides at all-guides.com
3): fix
bottom of the container and pour
out the residual liquid.
•
Clean the waste tank with a damp
cloth.
•
Wash the foam filter (
warm water and soap, and allow to
dry.
•
Beat the dust out of the fluted filter
(
23) and clean it with a paint brush
or hand brush.
•
Replace the paper filter bag (
when full (see "Spare parts/Accesso-
ries" for reordering)
•
Knock the optional dry filter (fabric
bag) out. Where necessary, wash with
lukewarm water and soap, and allow to
dry.
Maintenance
•
The equipment is maintenance free.
Storage
1.
Wind the mains lead (5) around
the handle (4).
2.
Wind the suction hose (19)
around the handle (4).
3.
The accessory holders (7/13)
are used to store the telescopic
suction pipe (17) and the nozz-
les (25/26).
4.
Store the appliance in a dry
place and out of reach of chil-
dren.
21) with luke-
24)
Publicité
