Panasonic WV-LD1500 Mode D'emploi page 10

INSTALLATIONS
WARNING
The installations described in the figures should be
made by qualified service personnel or system
installers.
Caution: Attach this monitor to a flat wall with a locally pro-
cured mounting bracket. After the installation, secure
the monitor to prevent dropping.
Places to be avoided
• Very dirty and dusty places
• Places subject to strong vibrations
• Humid places
• Places where drastic temperature changes occur
• Places which are not level
• Steamy and oily places such as kitchens
I Removing the Monitor Stand
Before mounting the monitor on the wall, remove the moni-
tor stand.
1. Remove the screw of stand cover (M4), and then
remove the stand cover.
2. Remove the four screws of monitor stand, and then
remove the monitor stand.
Screw (4)
Stand cover
Screw (4)
10
All manuals and user guides at all-guides.com
Monitor stand
I Mounting on the Wall
To mount the monitor on the wall, a mounting bracket
(locally procured, VESA standard 100 mm {3-9/10"} pitch)
and screw (M4, locally procured) are required.
Notes:
• Do not block the ventilation opening or slots on the
cover.
• Do not mount the monitor on places subject to constant
vibrations. That may cause trouble or damage.
• Do not install the AC adapter into the wall. That may
cause temperature to rise.
Screw holes for VESA mounting bracket
(100 mm {3-9/10"} pitch)
Screws
(M4, locally procured)
Mounting bracket
(locally procured)