Publicité
Les langues disponibles
Les langues disponibles
Once the call is connected, the display will be shown on both handsets. To end intercom mode, either handset
can hang up the call by press
Call transfer
During a call, it's to transfer the call to another handset.
1. During a phone call, press INT key once, you will be prompted to select the number of the internal
handset with which they wish to connect.
2. The destination handset will ring. With the melody defined for an internal call.
3. Press the
key of the other handset to accept the call.
The two internal handsets will be connected. To complete the transfer of the call, the initiating handset
should be placed on the cradle and the external call will now be connected to the second handset.
Party conference call
1. When a call comes, Press (HS1)
2. Then press (HS1) INT key once, you will be prompted to select the number of the internal handset with
which you wish to connect.
3. The destination handset will ring.
4. Press (HS2) the
5. Press (HS1) then the
6. Press
to quit the party conference, and other parties can also continue to communication.
To Lock/Unlock the keypad
To lock the keypad
Press and hold the
key for about 2 seconds.
You will hear a beep tone, the icon
While the keypad is locked, any key you press is invalid.
To unlock the keypad
Press and hold the
key for about 2 seconds.
You will hear a beep tone, the icon
Handset volume booster function
1.
At handset conversation mode, if you feel the handset volume too low, press
volume about 15 dB temporary to help you to lesson clearly.
2.
Press
key again or pick up the handset next time, the handset volume is return to primary state.
TROUBLE SHOOTING
No signal bar is displayed on the screen
The handset is out of range. Move it closer to the base station
No dialing tone
Check your phone connections
The handset is out of range. Move it closer to the base station
No docking tone
The handset is not placed properly on the base station/ charger
The charging contacts are dirty. Disconnect the power adaptor first and clean the contact with proper
damp cloth.
All manuals and user guides at all-guides.com
key.
key
key to accept call.
key then you can talk all together.
will appear on the top of display, "HS LOCKED" will appear on LCD.
will disappear from the display and it will go back to idle mode.
29
once to increase the
Publicité
