Daewoo International DTD 7200 Manuel D'instructions page 27

key to confirm the setting, and return to the "DATE & TIME" menu.
4) Press
NOTE: The date and time will be automatically set when the first caller ID message is received.

CONTRAST
The user is able to set the contrast of the LCD display, by selecting the following options.
1) Press key to enter LCD display contrast settings.
key, then press △ or ▽ key to select CONTRAST,
2) Press
key to confirm, then press △ or ▽ key to select from 1-8 levels.
3) Press
 SELECT BASE
This function allows the user to register the handset to existing base (with other handset registration)
key, then press △ or ▽ key to choose SELECT BASE.
1) Press
key and the LCD displays BASE 1 + .
2) Press
Press △ or ▽to select base (BASE 1~4) or AUTO.
3)
4) Press to begin searching, if you hear a sound of "di-du", means register successful.

HANDSET DEFAULT :
This function allows the user to restore the handset setting to the factory default.
key, then press △ or ▽ key to select HS DEFAULT item.
1) Press
2) Press key to confirm.
3) The user will be prompted to enter the PIN CODE, the display shows PIN?, then press numerical keys
to input code.
4) If the PIN code is validated all base settings will be returned to the factory default.
One-touch memory
 Store the number into one-touch memory
In on-hook state, pre-dial a number or scroll to the desired incoming number
Press & hold M1 or M2 for 2 seconds, there will be a "beep" sound, means the number is stored.
 Dial out number from one-touch memory
In on-hook or off-hook state, press M1 or M2 key, the number is dialed out.
 Delete one-touch memory
In on-hook state, press
Handset Menu function 5: REGISTRATION
Maximum 5 handsets can be linked to the same base unit by the follow ways,
Maximum 4 bases can be linked to the same handset by the follow ways:
1) In standby mode, press
key to enter. Press △ or ▽ key to select BASE from BASE1, BASE2, BASE3 or BASE 4.
2) Press
key to confirm, LCD displays PIN? Then enter the pin code (defaulted as 0000, if input
3) Press
wrong number, press R/CLR to delete).
4) When finished press
you has get DI-DU- DU- sound. The handset and base have registration successfully.
Notes:
1) If the handset and base is fail to registration successfully, the handset will return to the standby mode.
2) You can repeat the above steps to register another handset for the same base, and the successfully
All manuals and user guides at all-guides.com
key twice, then press and hold M1 or M2 key to delete it.
key, then press △ or ▽ key to select REGISTERATION item.
key to confirm. LCD display SEARCHING, then press and hold
27
key until