Samsung HW-C400 Manuel Complet page 26

Bluetooth Power On/Off
If a previously paired Bluetooth device tries to pair with the Soundbar when the Bluetooth Power On
function is on and the Soundbar is turned off, the Soundbar turns on automatically.
1. Press and hold the SOUND MODE button for more than 5 seconds on the remote while the
Soundbar is turned on.
2. Multicolor LED indicator on the Soundbar blinks "Cyan".
PAIR
SOUND MODE button
SOUND
5 Sec
MODE
Bluetooth Power
On/Off
Disconnecting the Bluetooth device from a Soundbar
VOL WOOFER
You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth device's
user manual.
• The Soundbar will be disconnected.
• If the Soundbar is disconnected from the Bluetooth device, the multicolor LED indicator on the
Soundbar blinks "Red" three times.
Disconnecting the Soundbar from the Bluetooth device
Press the (Source) button on the top panel or on the remote control to select the mode other than
"Bluetooth".
• Disconnecting takes time because the Bluetooth device must receive a response from the
Soundbar. (Disconnection time may differ, depending on the Bluetooth device)
LED Indicator
Cyan Blinks X1
On (Default)
Toggle On  Off
ENG - 26
Red Blinks X1
Off