Publicité
Les langues disponibles
Les langues disponibles
If the device fails to connect
• If you have an existing Soundbar (e.g., [AV]Soundbar C4-Series) on the list of speakers on the
Samsung TV, delete it.
• Then repeat steps 1 through 3.
Disconnecting the Soundbar from the Samsung TV
Press the
(Source) button on the top panel or on the remote control to select the mode other than
"Bluetooth".
• Disconnecting takes time because the Samsung TV must receive a response from the Soundbar.
(The time required may differ, depending on the Samsung TV model.)
TV Auto connect On/Off
To cancel the automatic Bluetooth connection between the Soundbar and TV, press the Left button on
the remote control for 5 seconds with the Soundbar in "Bluetooth Ready" status. (Toggle On → Off)
Left button
5 Sec
Bluetooth Ready
Notes on Bluetooth connection
• Locate a new device within 3.28 ft (1 m) to connect via Bluetooth communication.
• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
• The Soundbar automatically turns off after 18 minutes in the Ready state.
• The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
– If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
• Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
LED Indicator
Cyan Blinks X1
On (Default)
Toggle On Off
ENG - 20
Red Blinks X1
Off
Publicité
