JVC RX-5000VBK Manual D'instructions page 27

Specifications
EN21-26.RX-5000V[C]/F
All manuals and user guides at all-guides.com
Amplifier
Output Power
At Stereo operation: 100 W per channel, min. RMS, driven
into 8 Ω, at 40 Hz to 20 kHz with no more
than 0.8 % total harmonic distortion.
At Surround operation:
Front Channel: 100 W per channel, min. RMS, driven into
8 Ω at 1 kHz with no more than 0.8 % total
harmonic distortion.
100 W, min. RMS, driven into 8 Ω at 1 kHz,
Center channel:
with no more than 0.8 % total harmonic
distortion.
Rear channel: 100 W per channel, min. RMS, driven into
8 Ω at 1 kHz, with no more than 0.8 % total
harmonic distortion.
Total Harmonic Distortion (8 Ω, 1 kHz):
0.8 %* at 100 W output
(* Measured by JVC Audio Analysis
System)
Audio
Audio Input Sensitivity/Impedance (1 kHz):
2.7 mV/47 k Ω
PHONO (MM):
CD, TAPE/MD, VCR, DVD:
220 mV/47 k Ω
Audio Output Level: TAPE/MD, VCR 220 mV
Signal-to-Noise Ratio ('66 IHF/'78 IHF):
PHONO: 70 dB/77 dB (at REC OUT)
CD, TAPE/MD, VCR, DVD:
87 dB/67 dB
Frequency Response (8 Ω):
PHONO: 20 Hz to 20 kHz (±1 dB)
CD, TAPE/MD, VCR, DVD:
20 Hz to 20 kHz (±1 dB)
RIAA Phono Equalization:
±1.0 dB (20 Hz to 20 kHz)
Video
Video Input Sensitivity/Impedance:
VCR, DVD:
Video Output Level:
VCR, MONITOR OUT: 1V(p-p)/75 Ω
Synchronization:
Signal-to-Noise Ratio:
25
1V(p-p)/75 Ω
Negative
45dB
00.2.3, 8:32 PM
25