Publicité
Les langues disponibles
Les langues disponibles
Networked printer troubleshooting
If you cannot connect the printer to the network...
• Get help from Wireless Printing Center: The HP Wireless Printing Center website (www.hp.com/go/wirelessprinting)
is an online reference guide to setting up your home network and HP printer for wireless printing. On this website,
you will find information that can help you prepare your wireless network, set up or reconfigure your printer, and
troubleshoot your setup (including using the Windows Network Diagnostic Utility).
• Confirm your printer's wireless radio is on. From the Home screen of the printer display, touch the
Wireless icon, if it shows Wireless Off, touch Turn On.
• Confirm that your printer is on your network. To do this:
1. From the Home screen of the printer display, touch the Wireless icon.
2. Touch Settings, touch and drag your finger vertically to scroll through options, and then touch Print
Wireless Test Report.
3. The Wireless Test Report is automatically printed.
- Check the top of the report to see if something failed during the test.
- See the Diagnostics Results section for all tests that were performed, and whether or not your
printer passed.
- Find out the Network Name (SSID) to which your printer is currently configured for connection from
the Current Configuration section.
Note: Your computer might be connected to a Virtual Private Network (VPN). Temporarily disable the VPN
before proceeding with the installation. Being connected to a VPN is like being on a different network;
you will need to disconnect the VPN to access the printer over the home network.
If your printer is not connected to your network, you need to reconnect the printer to your network. From
the Home screen, touch the Wireless icon, touch Settings, touch Wireless Setup Wizard, and then follow
the steps on the screen to connect the printer.
• Security software might be causing problems. Security software installed on your computer is designed
to protect your computer against threats that can come from outside your home network. A security
software suite can contain different types of software such as an anti-virus, anti-spyware, firewall and
child protection applications. Firewalls can block communication between devices connected on the home
network and can cause problems when using devices like network printers and scanners.
Problems that you might see include:
- The printer cannot be found over the network when installing the printer software.
- You suddenly cannot print to the printer even though you could the day before.
- The printer shows that it is OFFLINE in the Printer and Faxes folder.
- The software shows the printer status is "disconnected" even though the printer is connected to the network.
- If you have an All-in-One, some functions work, like print, and others don't, like scan.
A quick troubleshooting technique is to disable your firewall and check if the problem goes away.
Here are some basic guidelines for using security software:
- If your firewall has a setting called trusted zone, use it when your computer is connected to your
home network.
- Keep your firewall up to date. Many security software vendors provide updates which correct known issues.
- If your firewall has a setting to not show alert messages, you should disable it. When installing the HP
software and using the HP printer, you may see alert messages from your firewall software. You should
allow any HP software which causes an alert. The alert message may provide options to allow, permit,
or unblock. Also, if the alert has a remember this action or create a rule for this selection, make sure to
select it. This is how the firewall learns what can be trusted on your home network.
If you still cannot connect the printer to the network, go to www.hp.com/go/wirelessprinting, click
Firewall Help, you can find more solutions there.
All manuals and user guides at all-guides.com
5
Publicité
