Clean
Cleaning the shaver
1. Remove the shaver from the AC
adaptor [B].
2. Apply some hand soap and some
water to the outer foil.
• Close the cleaning shutter [A2].
3. Turn the shaver on.
8
All manuals and user guides at all-guides.com
To remove light dirt
4. Slide the cleaning shutter
3
5. Clean the outer foil
6. Turn the shaver off.
7. Wipe off any drops of water with a dry
8. Dry the outer foil section [A:] and the
9. Attach the outer foil section [A:] to
▼
[A2] until it clicks.
section [A:] with running
water.
• Rinse with water and
shake up and down
several times to remove
the water.
▼
cloth.
shaver completely in a shaded area.
the shaver.
• Open the cleaning shutter.
• The outer foil section will dry faster if
removed from the main body.
▼
For heavy dirt
4. Turn the shaver off after
10 ‑ 20 seconds.
5. Remove the outer foil
section [A:] and turn the
shaver on.
6. Clean the shaver and the
outer foil section [A:]
with running water.
• Rinse with water and
shake up and down
several times to remove
the water.
▼
8