Using the carrying holder
The shaver can be kept vertically or horizontally. When
transporting the shaver, you can use the carrying holder to
protect the outer foil and prevent erroneous operation of the
switch.
• When transporting the shaver, be sure to clean off any
shavings before attaching the carrying holder.
Attaching the carrying holder
Attach the carrying holder as illustrated.
• Check that all four protrusions on the shaver
are inserted securely.
Removing the carrying holder
Remove the carrying holder while pressing
down on both sides.
6
All manuals and user guides at all-guides.com
Charge
Charging the shaver
Perform the following steps to charge the shaver if it seems to
lose the speed.
You can charge the shaver with the carrying holder attached.
1
1
• Wipe off any water droplets on the side
• If you charge the shaver with power
2
2
The charge indicator lamp glows red.
• Charging time differs depending on the rated voltage. (See
• When charging the shaver for the first time or when it has
3
3
• To keep charging the battery will not affect battery
• Recommended ambient temperature for charging is
Turn off the shaver and insert
it in the AC adaptor [B] until it
clicks as illustrated.
terminals.
switch turned on, it will start working
when you remove from the AC adaptor.
Put the plug into a household outlet.
page 11.)
not been in use for more than 6 months, the charge
indicator lamp may not glow for a few minutes, or the
operating time may shorten. Please charge it for more than
20 hours in such cases.
Disconnect the plug after charging is
completed.
performance.
0 ‑ 35 °C. The battery may not charge properly or at all under
extreme low or high temperatures.
2
1