SunPower PERFORMANCE P6-COM-S-BF Instructions D'installation page 3

Limited Warranty for PV Modules
1. Limited Product and Power Warranties
Effective Date: January 1, 2022.
PV Module(s). This Limited Warranty is effective for photovoltaic modules from Maxeon Solar Technologies, Ltd. ("Maxeon") installed in
Australia with the model numbers listed in the Warranty Table sold after the Effective Date (the "PV Modules"). The PV Module(s)
exclude any power electronic, external connector, jumper, microinverter or other external device included or sold with the PV Modules.
Warranty Start Date. The Warranty Start Date is the earlier of: (i) the date of array interconnection, and (ii) 6 months following delivery
of the PV Modules. If the delivery date cannot be verified, then the manufacturing date will be used in its place.
Product Warranty. Subject at all times to the terms and conditions in this Limited Warranty, Maxeon warrants the PV Modules will be
free from defects in materials and workmanship that materially impact the functioning of the PV Modules under normal application,
installation, use and service conditions during the Product Warranty Term, as set forth in the Warranty Table.
Power Warranty. Subject at all times to the terms and conditions in this Limited Warranty, Maxeon warrants the PV Modules will have a
1
Measured Peak Power of at least the Guaranteed Peak Power during the Power Warranty Term, as set forth in the Warranty Table.
Registration. The 40-year Warranty Terms for applicable PV Modules are subject to and conditional upon the terms of this Limited
Warranty and digital registration of the PV Modules in accordance with
products/warranty, including acceptance of applicable Maxeon terms of use and privacy policies ("Registration"). If the PV Modules are
not registered with Maxeon within 6 months of the Warranty Start Date, then the Warranty Terms are each 25 years, as set forth in the
Warranty Table.
Warranty Table.
PV Modules Product Warranty
Term
SPR-MAXy-xxx 40 years from the
SPR-Xyy-xxx Warranty Start
SPR-Eyy-xxx Date (25 years if
no Registration)
SPR-Py-xxx 25 years from the
Warranty Start
Date
2. Customer Support, Claims Process and Coverage
If any PV Module fails to conform to this Limited Warranty, except in the event such failure or any power loss results from or arises out
of (in whole or in part) any of the excluded events set forth in Section 4 below, as determined by Maxeon in its sole reasonable discretion,
then for the applicable Warranty Term, Maxeon will elect (in its sole and absolute discretion) to either repair, replace, or refund the
defective PV Modules as set forth herein.
If you have a claim covered by this Limited Warranty, then immediately contact Maxeon at customers@maxeon.com. Upon receipt of a
claim, Maxeon may require additional information regarding the claim, including: applicable warranty registration information; itemized
proof of purchase, delivery or installation; serial and model numbers; and evidence regarding the basis of claim. All Maxeon obligations
hereunder are expressly contingent upon the timely and full provision of such additional information. Returned PV Modules will not be
accepted unless prior written authorization has been provided by Maxeon.
For any valid claim hereunder pertaining to any PV Module, Maxeon will, in its sole discretion, repair, replace, or refund the original
purchase price of the covered PV Modules. For repairs and replacements, Maxeon will pay reasonable, customary transportation costs
for the return of covered PV Modules from, and the shipment of repaired or replacement PV Modules to, the place where the covered
PV Modules were originally delivered by Maxeon. Replacement PV Modules may be refurbished or remanufactured PV Modules, will be
electrically and mechanically compatible with the covered PV Modules, and will have a substantially equal or greater power rating.
For PV Modules originally installed in Australia by Maxeon, any affiliate of Maxeon, or a Maxeon Authorised Partner, Maxeon will pay
reasonable, necessary, and actual removal and reinstallation service costs of repaired or replaced PV Modules, up to AU$375 for up to
1
"Measured Peak Power" is a measurement of the watt peak of a PV Module at Standard Test Conditions (1000W/m
current, LACCS FF and Voltage from NREL calibration), as described in IEC61215, measured per IEC60904, and accounting for 3% measurement
tolerance. Measured Peak Power measurements require a sweep rate of no less than 200ms to ensure an accurate power measurement. Maxeon can
provide a detailed testing procedure or a list of recognized testing agencies upon request.
© 2022 Maxeon Solar Technologies, Ltd. All Rights Reserved. View warranty, patent and trademark information at maxeon.com/legal.
Power Warranty Guaranteed Peak Power (a percentage of "Minimum Peak Power,"
Term which is the rated power shown on the label for the PV Module)
40 years from the 98% of the Minimum Peak Power for the 1
Warranty Start Warranty Term, reduced by 0.25% at the beginning of each
Date (25 years if subsequent year of the Power Warranty Term, down to 88.25% for
no Registration) the final, 40
25 years from the 98% of the Minimum Peak Power for the 1
Warranty Start Warranty Term, reduced by 0.45% at the beginning of each
Date subsequent year of the Power Warranty Term, down to 87.2% for the
final, 25
Maxeon Solar Technologies, Ltd. | www.sunpower.maxeon.com
Document#: 544362 REV A
https://sunpower.maxeon.com/au/solar-panel-
th
year, and 92% for the final, 25
th
year
2
st
year of the Power
th
year, if no Registration.
st
year of the Power
irradiance, AM1.5, 25C. SOMS