Publicité
Les langues disponibles
Les langues disponibles
Step 10: Attach the handrail (20) to the front support (6) with button head bolts M8 x 1,25 x 15mm (55) and washers
M8 (69).
Step 11:
•
(NOTE: Do not overtighten bolts (56, 59), as pulleys must rotate freely.)
•
Run the eyelet end of the LAT bar cable (25) (2050mm long) through the slot at the top end of the top beam (5)
and attach the ball end of the LAT bar cable to the top beam (5) with a pulley (23), a button head bolt M8 x 1,25 x
115mm (59), nylock nut M8 x 1,25 (67), two washers M8 (69) and two pulley spacers (24).
•
Attach the LAT bar cable (25) to the bracket on the top beam (5) with a pulley (23), button head bolt M8 x 1,25 x
45mm (56), nylock nut M8 x 1,25 (67), two washers M8 (69) and the wide cable guide (26).
All manuals and user guides at all-guides.com
20
Publicité
