Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Step 7: Attach the tension posts (8) to the back of the top beam (5) with button head bolts M10 x 1,5 x 50mm (61),
nylock nuts M10 (71) and washers M10 (70).
Step 8: Slide the force arms (right & left) (9, 10) onto the shafts on upright (4) and secure with washers M10 (70) and
nylock nuts M10x1,5 (68).
Do not overtighten the nuts, as the left and right force arms must be able to pivot smoothly.
Step 9: hook three tension cords (31) to the three hooks at the top of the tension posts (8) on both sides. Hook the
lower ends of the cords to the hooks on the outer ends of the force arms (left/right) (9, 10).
19
Publicité
