Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
♦
Exposures to even low levels of lead can
cause irreversible brain and nervous system
damage. The greatest danger of lead
poisoning is to children and pregnant women.
♦
Before starting work, it is important to
determine whether the paint to be stripped
contains lead. This can be done using a test kit
or by a professional decorator. Do not smoke,
eat or drink in a work area that could or may
be contaminated by lead. Lead based paints
should only be removed by a professional and
should not be removed using a heat gun.
Safety of others
♦
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for the their safety.
♦
Children should be supervised to ensure that
they do not play with the appliance.
Labels on tools
Warning! To reduce the risk of injury, the
user must read the instruction manual.
Electrical safety
This product must be earthed. Always
check that the power supply corresponds
to the voltage on the rating plate.
Power plugs must match the outlet. Never modify
the plug in any way. Unmodifi ed plugs and
matching outlets will reduce risk of electric shock.
♦
If the supply cord is damaged, it must be
replaced by the manufacturer or an authorised
Black & Decker Service Centre in order to
avoid a hazard.
Extension cables & Class 1 product
♦
A 3-core cable must be used as your appliance
is earthed and of Class 1 construction.
♦
Up to 30m (100 ft) can be used without loss of
power.
Voltage drops
Inrush currents cause short-time voltage drops.
Under unfavourable power supply conditions, other
equipment may be affected. For example, artifi cial
lighting will show a temporary drop in magnitude
when the machine is switched on. If the system
impedance of the power supply is lower than 0.19
6
All manuals and user guides at all-guides.com
Ω, disturbances are unlikely to occur.
Features
1. On/off switch
2. Heat control knob
3. Nozzle
Assembly
Warning! Before assembly, make sure that the
appliance is switched off and unplugged.
Fitting an accessory
A selected range of accessories can be obtained
from your local retailer.
-
-
-
-
-
♦
Warning! Make sure that the tool is switched off
and cooled before fi tting any accessory.
Residual risks
Additional residual risks may arise when using the
tool which may not be included in the enclosed
safety warnings. These risks can arise from
misuse, prolonged use etc.
Even with the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These include:
♦
♦
♦
♦
♦
Use
Warning! Let the tool work at its own pace. Do not
overload.
Cone nozzle:
Concentrates the air stream
on a smaller area.
Fish tail:
Spreads the air stream over
a wider area
Spoon refl ector: For soldering pipes.
Glass protector: For the protection of glass
during paint stripping.
Scraper:
For the removal and stripping
paint and varnish.
Fit the connecting piece of the accessory over
the nozzle (3).
Injuries caused by touching any rotating/
moving parts.
Injuries caused when changing any parts,
blades or accessories.
Injuries caused by prolonged use of a tool.
When using any tool for prolonged periods
make sure you take regular breaks.
Impairment of hearing.
Health hazards caused by breathing dust
developed when using your tool (example:-
working with wood, especially oak, beech and
MDF).
Publicité
