Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1 Package Contents
Wall Mount
Wall mount
3-axis adjustment unit and slide
plate (attached when shipped)
Open-ended wrench
13 mm (for M8 and M6) ×
6 mm (for hexagonal
shaft)
Shape
M4 × 12 mm hexagon socket head cap bolt with
washer/spring washer
M6 × 20 mm hexagon shoulder head bolt with
washer/spring washer
M6 × 20 mm cross recessed head shoulder screw
with plastic washer
•
Use the bolts or screws supplied with the wall mount to install it as directed in this guide. Do not
substitute these bolts with any other types.
•
You need to use commercially available M10 × 60 mm anchors (at least 4) and one M10 screw to attach
the wall plate to the wall.
•
Gather the tools and parts you need before you begin installation, including a #3 cross-head screwdriver.
Wall plate
Hexagonal shaft
Hexagon wrench (for M4)
Name
Quantity
7
Wall plate cover
Template sheet
(for installing the wall plate)
End cap
Masking sticker
Application
5
For wall plate assembly
4
For 3-axis adjustment unit/wall mount
installation
4
For slide plate/projector installation
1
For wall mount/wall plate installation
3
Publicité
Chapitres
Table des Matières
