Adjust The Forward/Backward Slide; Adjust The Vertical Slide - Epson ELPMB53 Guide D'installation

I

Adjust the forward/backward slide

1. Loosen the M4 × 12 mm hexagon socket head cap bolts (×2) (
2. Adjust the slider for the wall mount (
3. After you finish making all of the adjustments in steps
socket head cap bolts (×2) you loosened in
J

Adjust the vertical slide

1. Loosen the M6 × 20 mm hexagon shoulder bolt (
2. Adjust the vertical slide with the M8 hexagon bolt at the bottom of the wall mount, or the hexagonal
shaft at the top of the wall mount (
Tightening the M8 hexagon bolt lowers the wall mount, and loosening the bolt raises it.
Tightening the hexagonal shaft raises the wall mount, and loosening the shaft lowers it.
3. After you finish making your adjustments, tighten the M6 × 20 mm hexagon shoulder bolt you
loosened in .
).
).
E J
to , tighten the M4 × 12 mm hexagon
.
).
).
38