About This Guide; Package Contents - Epson ELPMB29 Guide De L'utilisateur

Do not install this product in a location where the operating temperature for the projector may be
exceeded.
Such an environment may damage the projector.

About This Guide

This guide describes how to install the following projectors on a table using the Interactive Table Mount
(ELPMB29):
BrightLink® 475Wi/475Wi+/480i/485Wi/485Wi+
BrightLink 575Wi/575Wi+/585Wi/585Wi+/595Wi/595Wi+
BrightLink Pro 1410Wi
Note:
BrightLink model availability varies by country.

Package Contents

Bolts
Shape
M3 × 8 mm hexagon socket head cap bolt for
finger touch models
M4 × 12 mm hexagon socket head cap bolt with
washer and spring washer
M4 × 8 mm hexagon socket head cap bolt
M8 × 35 mm hexagon socket head cap bolt
Have the necessary tools ready before you begin the installation.
Caution
Name
4
Base frame unit with adjuster bolts
Attachment plate
Accessory tray
Hexagon wrenches (for M3, M4,
and M8)
Bolts
Touch Unit attachment plate for
finger touch models
Quantity
2 For mounting the Touch Unit attachment
plate on the Touch Unit.
2 For mounting the Touch Unit attachment
plate to the base frame unit.
4 For mounting the attachment plate to the
projector.
1 For mounting the tray to the base frame unit.
2 Used as stoppers. (Pre-installed in the base
frame unit in mount position 2.)
2 For mounting the attachment plate to the
base frame unit.
Application