Blanco TRADON HD 520787 Notice De Montage Et D'entretien page 6

Installation and care instructions
GB
We have put together the most important product information
to enable you to benefit from the high degree of functionality and the
first class comfort provided by BLANCO taps.
Parts list BLANCOTRADON HD
1 Lever
2 Cover cylinder
Covering ring + Seal
3
Cartridge retaining ring
4
Cartridge
5
6 Body
7 Spout retaining screw
Seals
8
Inner body
9
Spout
10
11 Flow Straighter + Seal
12 Housing for jet control
Base Ring
13
Stabilisation triangle
14
Fixing kit
15
16 Flexi hose blue + Seal
17 Flexi hose red + Seal
Technical data
Use
• Pressurised hot water tank and instantaneous
water heater
• Not suitable for low pressure hot water tank/hot
water tank
Operating pressure
• Min. 0.5 bar
• Max. 10.0 bar
Temperature
• Max. 70° C
Note
pressure differences between cold and warm water
connection should be less than 3 bar otherwise the
mixing ratio deviates from the lever position.
Symbols
right wrong
All manuals and user guides at all-guides.com
recommended
Installation
Illustrations
1 Tap hole: 35 mm
2 - 4 Attach tap
NOTE: don't forget the seal between tap
and supporting surface!
Flush the pipe work to remove foreign debris
5
from the system. When the tap has been
connected check for leaks,movement and flow
rate/pattern.
Recommendation: fit dirt filter
6
- Connect flexi hoses
7 11
further illustrations on the back fold-out flap
Rinse perlator/ jet regulator
12
When tap has been fitted check:
tightness, movement, full jet of water
Care
Please note the following advice and the
illustrations on the back fold-out flap.
Illustrations
- Use soft (microfibre) cloth and mild cleaning
13 15
agent
16 - 17 Take care with hard objects
- Cleaning the perlator/ jet regulator with
18 19
vinegar
Important
in the event of a query, please enter the 11-digit
Article Number (see wrapper on the cold water hose
of your tap) .
Example
n s o n b u y in g
C o n g ra tu la ti o
ta p – w e h o p
th is B L A N C O
a re d e li g h te d
e y o u
w it h it !
2