Makita 6924N Manuel D'instructions page 6

If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Sleeve Bolt size
Outer sleeve M22
Inner sleeve M22
Outer sleeve M24
Inner sleeve M24
Outer sleeve 7/8"
Inner sleeve 7/8"
Outer sleeve
Inner sleeve
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ from
country to country.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
WA
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a ): 2.5 m/s
h
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Shear Wrench
Model No./ Type: 6924N
are of series production and
Conforms to the following European Directives:
2006/42/EC
6
All manuals and user guides at all-guides.com
Length (mm)
49
48
49
49
49
48
1" 49
1" 49
ENG905-1
): 89 dB (A)
pA
): 100 dB (A)
ENG900-1
2
or less
2
ENG901-1
ENH101-15
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30. 1. 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN