Publicité
Les langues disponibles
Les langues disponibles
T R AN S P O R T I N G
1
2
4
FREE WHEEL/
MANUAL MODE (UP)
•
Turn OFF your VISTA power wheelchair
•
Unlock the frame latch (1) while simultaneously beginning the folding process
•
Continue the folding process by holding one hand beneath the seat frame and another on the
top bar (2), similar to a lawn chair
•
Once folded, the power chair can balance on its rear wheels (3)
•
Next, release the wheels to allow the VISTA to move freely by pressing UP on the rear brake
switches as indicated (4)
•
VISTA can also be pulled utilizing the top of the seat bar and rolling on the anti-tip wheels as
shown in image 5
16
3
5
T R AN S PO R T I N G
1
3
•
To load the VISTA power chair into
the back of a vehicle for transport we
recommend utilizing the back of the
vehicle as leverage
•
Position the power chair against the
car as indicated in Image 1 (Note:
we recommend a blanket to reduce
scratching of the vehicle)
•
LOCK the brakes by pressing down on
the rear brake switches
WARNING: Never transport the VISTA in a tie down system, as the VISTA is not compatible with them. Never sit in the VISTA and be
transported in a moving vehicle. Do not place the folded VISTA in the front seat with the driver where it could move or slide.
2
4
•
Once LOCKED, grasp the rear wheels
(Image 2)
•
Lift against the back of the vehicle,
leveraging the power wheelchair into
the trunk of the vehicle (Image 3)
•
Push the VISTA into the desired position
within the vehicle (Image 4)
17
Publicité
