Fox CONTINENTAL X Instruction Pour Le Montage page 4

Assembly
GB
Instructions
Unfold all poles and join
together, lay out dome flat
on ground as shown, push
poles A (two longest-coded
blue) through flaps from cor-
Fig.1
ner to corner. Then push
pole B (coded green)
POLE C
through front flaps followed
by pole C (coded red)
through rear flaps (fig.1) and
pole D (coded yellow)
POLE B
through front porch flap.
POLE A
All manuals and user guides at all-guides.com
POLE A (Blue)
POLE A (Blue)
POLE B (Green)
POLE C (Red)
POLE D (Yellow)
POLE E
POLE A POLE A
2
2
3
3
POLE C
4
4
POLE B
1
1
POLE A
POLE D
Fit pole ends over metal pins to
Fig.2
front position 1 (fig.2), lift and bend
poles, fit pole ends over metal pins
to rear position 2 (fig.3). Bend
poles B & C and connect to posi-
tion 3/4, followed by pole D which
connects to position 1 using the
second metal pin. Insert pole E
porch spreader pole through flap
and insert into eyelets. Knot
material ties over poles as (fig. 4).
Fig.3 Fig.4
Lay the inner tent out inside
the outer skin with the porch
ground sheet to the front. The
inner tent for the first time of
using will need to be clipped
in using the adjustable clips
at the base and the elasticat-
ed toggles on the sides. To
hang the inner tent to the
outer see (fig. 5).Once this is
Fig.5
completed the inner tent
stays connected to the outer
to aid the quick erection of
your dome when next used.
GB