Publicité
Les langues disponibles
Les langues disponibles
Attaching the Power Connector
Step 1
Insert the power connector into the receptacle on the switch front panel.
Step 2
Use a flathead screwdriver to tighten the captive screws on the sides of the power connector.
Step 3
(Optional) Insert a second power connector into the receptacle on the
switch front panel.
Step 4
Use a flathead screwdriver to tighten the captive screws on the sides of the second power connector.
Step 5
To apply power to a switch that is directly connected to a DC power source, locate the circuit breaker on the panel
board that services the DC circuit, and switch the circuit breaker to the ON position.
Product Documentation and Compliance for the Cisco IE 4000 Switches—
Documentation produit et conformité pour les commutateurs Cisco IE 4000
8
All manuals and user guides at all-guides.com
±1 2/2
4/4 8
0.5 -3.
0A
1 6 TC
±1 2/2
4/4 8
0.5 -3.
0A
1 6 TC
78-100507-02
Publicité
