SLIM FIT
EN
Symptom
• The display shows E2 and the unit
goes
off
automatically,
display continuing to show error E2
until the anomaly is repaired. To
remove from the display, press the
On/Off key once on the keypad or
remote control.
The unit does not respond to the remote
control.
One or both compressors not working.
• The unit gives out a beeping sound.
All manuals and user guides at all-guides.com
with
the
• Blower or electrofan locked, short-
circuited or disconnected.
• 7,5A fuse of the blower or the electro
blown.
• Remote control not programmed.
• Remote control battery flat; the LED
does not come on.
• Electronic control faulty.
• Remote control defective.
• Poor terminal connection.
• Control modules defective.
• Compressors faulty.
• A lot of pressure in the circuit due to
excess load or very high temperature.
• Belt poorly connected in the keypad or
inverted.
20
Cause
®