Table des Matières
Publicité
6
1
7
8
8
2
9 mm
16 mm
English
Insert the spout tee through the mounting surface.
Install the mounting nut, metal washer, and fiber
washer on the spout tee.
Tighten the mounting nut and tensioning screws.
Connect the hoses to the valves.
Tighten the hose nuts using two wrenches, as
shown.
Do not allow the hoses to twist.
A twisted hose may become
loosened from the spout, causing
a leak.
Publicité
Table des Matières
