kqueo GLASS DESK CONNECT Mode D'emploi page 25

How to use the digital control panel
1. Main functions
2. Memory desired height
-Press button "M",it will display "S-" and flash.
-Then press number and set desired position.
3. Advanced Safety feature- lock and unlock the table.
Press buttons UP and DOWN at same time for 5 seconds, untill it displays "LOC"
-All buttons will become inactive and the desk will not move.
-Pressing buttons UP and DOWN together will
unlock the keypad and re-activate the desk
4. Reset the table
When an error code is displayed or the code RST, please reset the table.
-Unplug the power cord from the control box.
-Unplug the cable that links the keypad to the control box.
-Wait 30 minutes and plug all the cables in again.
-initiate reset procedure: press button DOWN and
hold for 10-15 seconds until it eaches the lowest
position and beeps.
If the keypad displays HOT,please unplug and replug
and let it cool off for a couple of minutes before proceeding again.
12