Cleaning And Care - WMF STELIO Mode D'emploi

Cleaning and care

Attention! Before cleaning, unplug the mains plug. The mill should never be placed in water, only
wiped down with a damp cloth. Do not use any abrasive cleaning agents.
▪ Clean the collection container (8), its lid (7) and the bean hopper lid (1) with a mild detergent
under warm water. All parts must be dry before use.
Note: The collection container (8), collection container lid (7) and bean hopper lid (1) are
also dishwasher safe.
▪ Wipe the casing with a slightly damp cloth and then rub dry.
▪ To clean the bean hopper (3), remove the remaining beans and wipe out with a damp cloth.
▪ Use a soft brush to clean the grinding mechanism. Remove the top grinding disc to do this. Set
the grinding setting control knob (6) to the finest level . Turn the top grinding disc in a clockwise
direction as far as the stop and remove it by lifting it up and out of the hopper (Fig. A).
▪ To insert the top grinding disc (2), set the grinding setting control knob (6) to the coarsest setting
. Place the top grinding disc into the bean hopper and turn it in an anti-clockwise direction as far
as the stop (Fig. B).
Bean hopper lid (1)
Grinding mechanism (2)
Bean hopper (3)
Collection container lid (7)
Collection container (8)
Appliance casing
Can be rinsed under
Dishwasher safe
Wipe with a damp
running water cloth
11