all-clad 100095568 Guide De L'utilisateur page 18

AC_OPTIGRILL-AUTOSENSE_ 2100095568.qxp_XXXXXXX 12/04/2016 08:50 Page18
Problems
The 4 Flashing white
indicator lights
+ one of the
buttons flashing +
discontinue beep
The appliance no
longer beeps
After the preheating
(setting temperature), I
have put my food on
the grill but the
indicator stays on
, button
flashing and the
cooking cycle does not
start
18 18
Cause
Appliance failure.
Appliance stored or used in
a room that is too cold.
Your food is thicker than 1,5
inches
You have not completely
opened the grill to place the
food.
Not sensing the food. The
food thickness too thin,
is flashing.
Solutions
Disconnect and reconnect your appliance and
immediately restart a preheat (setting temperature)
cycle. If the problem persists, contact your Customer
service.
Food must not be thicker than 1,5 inches.
Completely open the grill then close it.
Confirm the start of cooking by pressing the
button.