all-clad 100095568 Guide De L'utilisateur page 11

AC_OPTIGRILL-AUTOSENSE_ 2100095568.qxp_XXXXXXX 12/04/2016 08:50 Page11
When the indicator light for one of the automatic programs blinks, the cooking is in progress.
+ When the indicator light stays lit, and you hear a beep, the cooking level has been reached.
2 - MANUAL MODE:
If the indicator light for one of the 4 temperature levels of the manual program is blinking, the selected
temperature has not yet been reached.
+ If the indicator light stays lit and you hear a beep, the temperature has been reached, you can add
the food and start cooking.
• Remove all packaging, stickers and various accessories from the interior and exterior of the appliance.
• Before first use, carefully clean the plates using hot water and cleaning liquid, rinse and dry carefully.
• Place the detachable drip tray in the front of the appliance, then attach the 2 cooking plates.
• If you prefer, to achieve better results and to improve the effectiveness of the non-stick surface, you can wipe
the cooking plates using a cloth moistened with a little cooking oil. Ensure that the upper and lower plates are
correctly positioned in the appliance. Do not start preheating until the 2 plates are attached. Use a clean paper
towel to remove any excess of oil.
• When you plug in the appliance, the cord must be entirely uncoiled
Each cooking mode is detailed in the following sections:
COOKING, FROZEN PROGR M. Refer to the section that corresponds to your choice.
GETTING THE APPLIANCE READY
UTOM TIC COOKING, M NU L
EN
11 11