Frozen Program; (Frozen Food) (Automatic Cooking); Cooking A Second Batch Of Food - all-clad 100095568 Guide De L'utilisateur

AC_OPTIGRILL-AUTOSENSE_ 2100095568.qxp_XXXXXXX 12/04/2016 08:50 Page15

FROZEN PROGRAM

Note: this function can only be activated for automatic cooking.
• Press the on/off button. Warning: ensure that there is no food between the plates
• If the food to be cooked is frozen, press the FROZEN button before selecting the desired automatic cooking
program.
• Then refer to the steps previously described in AUTOMATIC COOKING.

COOKING A SECOND BATCH OF FOOD

Once your first batch of food has finished cooking, you will need to preheat the appliance again, even if it is for
the same type of food and level of cooking.
• Ensure that the appliance is closed and that there is no food inside.
• Select the appropriate mode or cooking program (this stage is necessary even if the cooking mode is the same
as for the previous foods).
• Press "OK" to start preheating. During this phase, the temperature indicator (in MANUAL mode) or the
PREHEAT indicator (in automatic mode) will blink. This stage is mandatory even if your appliance seems hot.
• Once the appliance is preheated, you will hear a beep and the indicator will stop blinking.
• The appliance can be used once it has preheated. Lift the lid of the grill, and place the food inside the
appliance. The stages are then as described as in the previous sections, according to the cooking mode used.
NOTE: if the new preheating cycle is launched immediately after the end of the previous cycle, the preheating
time will be shorter.

(FROZEN FOOD) (AUTOMATIC COOKING)

EN
15 15