Keep Warm Function; Cleaning And Maintenance - all-clad 100095568 Guide De L'utilisateur

AC_OPTIGRILL-AUTOSENSE_ 2100095568.qxp_XXXXXXX 12/04/2016 08:50 Page16
When the cooking process is complete, the appliance will automatically activate the keep warm function. The
WELL DONE indicator light will remain lit, and the appliance will beep every 20 seconds.
If the food is left in the grill, it will continue to cook while the plates cool down. You can press "OK" to stop the
beeping.
NOTE: the safety system will automatically turn off the appliance after a certain period of time (approximately 30
minutes).
• Press on/off to turn off the appliance.
• Unplug the grill.
• Allow to cool for at least 2 hours.
• To avoid accidental burns, allow the grill to cool completely before cleaning.
• Before cleaning, unlatch and remove the plates to avoid damaging the cooking surface.
• The drip tray and the cooking plates are dishwasher safe.
• The appliance and its cord must never be placed in the dishwasher. The heating elements (the visible and
accessible parts) must never be cleaned after the plates have been removed. If they are very dirty, wait until the
appliance is completely cool and use a dry cloth to clean them.
If you do not want to place the plates in the dishwasher, use hot water and a little dish detergent to wash them,
then rinse them thoroughly to remove all residue.
• Wipe them carefully with paper towel.
• Do not use a metallic scrubber, steel wool or abrasive cleaning products to clean any part of the grill. Only use
nylon or non-metallic cleaning pads.
• Empty the drip tray and wash it in slightly soapy hot water, then wipe it with a paper towel.
16 16

KEEP WARM FUNCTION

CLEANING AND MAINTENANCE