Publicité
Les langues disponibles
Les langues disponibles
FILTER INSTALLATION AND MAINTENANCE (CONT'D)
IMPORTANT: Replace with manufacturer recommended filter bags for best performance.
NOTE: When replacing filter bag, also check that secondary filter is clean.
CLEANING OR REPLACING SECONDARY FILTER
The secondary filter may require periodic cleaning or replacement. The filter is
positioned at the opening of the bottom part of the unit. Pull out the filter, and shake
or brush to remove dirt. An excessive amount of dirt on the secondary filter indicates
a torn or leaking disposable bag or the disposable bag is not properly installed. To
replace the secondary filter, insure that it is correctly positioned behind the four tabs.
WARNING
LARGELY DEPENDENT ON THE FILTER. A CLOGGED FILTER CAN CAUSE OVERHEATING AND
POSSIBLY DAMAGE THE CLEANER. CHECK THE FILTER PERIODICALLY AND REPLACE AS
REQUIRED.
No lubrication is necessary as the motor is equipped with lifetime lubricated bearings.
before storing your vacuum cleaner the tank should be emptied and cleaned. The vacuum should be
stored indoors.
Do not attempt to service your Shop-Vac
all other servicing to a qualified service center.
All manuals and user guides at all-guides.com
–
KEEP FILTERS CLEAN. EFFICIENCY OF THE VACUUM IS
LUBRICATION
STORAGE
SERVICE
dry vacuum cleaner beyond that described in this manual. Refer
®
PAGE 7
Publicité
