Climadiff MILLESIME 150 Manuel D'instructions page 43

7. Press 5 seconds button to select the temperature unit.
DOUBLE ZONE
1. Press 3 seconds on the button to turn on or off.
2. Light on/off key. Press 5 seconds to change the lighting mode. (See "B" & "C" below)
3. Area selection key for temperature adjustment. Press 5 seconds to select a program. (See "Pre-
program")
4. The LCD screen of the upper area.
5. The LCD screen of the bottom area.
6. Key to increase the set temperature by 1°C
7. Key to reduce the set temperature by 1°C
8. Press 5 seconds button to select the °C/°F temperature unit.
Notes :
•
Before any adjustment operation on the control strip, it must first be unlocked by pressing
3 seconds on buttons 7 and 8.
•
The LCD screen shows the set temperature. It can also display informative and temporary
icons that indicate the status of the cellar.
Check the actual temperature:
To consult the actual temperature of your cellar; Press and hold 5 and 6 (single zone) or 6 and 7 (dual
zone) simultaneously for 5 seconds; the actual temperature is displayed by flashing. The set
temperature is displayed again after 5 seconds.
Icon mapping:
The LCD screen of your control panel includes several icons. These icons appear depending on the
state of the device; It is normal that your cellar does not necessarily display all these icons. Below you
will find what they mean:
ENGLISH
43