Climadiff MILLESIME 150 Manuel D'instructions page 53

•
Select the cellar you want to delete, go to "settings" located at the top right and select
"Delete cellar".
•
Repeat the operation on all the cellars you wish to delete.
Attention ! if the cellar has at least one bottle, a pop-up will appear asking you to confirm this action.
Once the cellar is deleted, it is no longer possible to recover the related information.
Attention ! you cannot delete a cellar that does not belong to you. When a cellar is shared with you
and therefore visible from the "my cellars" page; you can stop sharing. When you are not the owner,
the "Delete" button is an "Exit" button. It allows you to leave the cellar. A pop-up appears to confirm
the action.
Change the cellar configuration
You wish to modify the configuration of your cellar differently from its standard configuration.
Go to your cabinet's "Settings" then Information/Shelves to delete or add shelves.
Add bottles
You have created your cellar in the VINOTAG® application; you can now add bottles.
Empty cellar
o Click on "add my first bottle" in the case of a new cellar or "+" Take a picture of the label of the
bottle you want to add to your cellar. A completed wine sheet appears; this sheet comes from
the VIVINO® database. You can modify or complete this wine sheet.
o Warning ! If the scanned bottle of wine is not available on the VIVINO® database or if you do
not have a premium subscription, you will have to manually complete the wine sheet
associated with your bottle. If you wish, it is possible not to take a photo of the label; in this
case, you will not be able to access the VIVINO® database, so you will have to manually
complete the wine sheet associated with your bottle.
Graphic mode
ENGLISH
List mode
53