O2Feel Karma Manuel D'utilisation page 37

2.1.3 Adjusting the handlebars
Our bikes have already been adjusted to guarantee
optimum ergonomics.
However, if you need to adjust the cockpit, we
recommend following these steps.
If you would like to adjust the angle of the
handlebars, you need to unscrew the stem and
angle the handlebars until you fi nd the most
comfortable position for you. Then tighten the
stem screws (6Nm if it has 4).
For stems with 4 screws, you must always unscrew
and screw in a cross pattern:
1
3
2.1.4 Adjusting the brakes
position
To make sure the brake lever is in the correct
position, unscrew the brake clamp and adjust
the angle so that it points in the same direction
as your forearms when you are in the cycling
position.
Adjust the position so that you can apply the
brakes with two fi ngers.
4
Tighten the screws again to 5Nm. If you want to
make any other adjustments, contact your reseller.
2
37