Publicité
Les langues disponibles
Les langues disponibles
Service
Any servicing requires specialist tools and knowledge and should be
performed only by our qualified service engineers or appointed service
agent. We strongly recommend that the main housing of the tool is not
opened, as such action may result in injury and may compromise the
tool warranty.
Features (FIG. A)
1. Status indicator
2. Trigger
3. Battery
4. Battery release
5. Belt hook
6. On/off switch
7. Magazine release
8. Magazine
9. Staple/nail indicator
10. Safety contact nose
11. LED light
12. LED light on/off switch
Battery charging (FIG. B)
Use only the battery charger that comes with the product. Only the battery
charger that is matched to the lithium-ion battery should be used in your
power tool.
• Insert the mains charging cable into the battery pack, aligning the
contact. Push cable end into the battery as far as it will go. Plug the
charger into a power socket. The indicator light on the battery pack will
be red (battery is charging).
• When battery is fully charged (approx. 3-5hrs) the green indicator light
will show.
• The battery is now ready to use. Remove the charger from the power
socket and remove the battery pack from the charger.
NOTE: The battery is supplied partially charged. To ensure full capacity of
the battery, completely charge the battery before using your power tool for
the first time. The lithium-ion battery can be charged at any time without
reducing its service life and reaches full capacity after its 5th charge/
discharge cycle. The power tool should be charged regularly every few
months to prevent damage to the battery. The battery is protected from
exhaustive discharge.
12
2V 140-180_Staple-Nail Gun_Manual_MultiLang.indd 12
2V 140-180_Staple-Nail Gun_Manual_MultiLang.indd 12
02/12/2020 14:43
02/12/2020 14:43
Publicité
