DeWalt XR DCD470 Mode D'emploi page 29

54V RIGHT-ANGLE DRILL
DCD470
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Max. Power Output
No Load Speed
1st Gear
2nd Gear
Max torque (Hard/Soft)
Chuck capacity
Max Capacity
Wood
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN60745-2-1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into metal
Vibration emission value a =
h,M
Uncertainty K =
Drilling into concrete
Vibration emission value a =
h,DD
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a Standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
WALT one of the
e
EC-Declaration of Conformity
Machinery Directive
DCD470
V 54
DC
1
Li-Ion 54V Right-Angle Drill
DCD470
W 2600
WALT declares that these products described under
D
e
Technical Data are in compliance with:
min 0–400
-1
2006/42/EC, EN60745-1:2009 +A11:2010, EN60745-2-1:2010.
min 0–1320
-1
These products also comply with Directive 2014/30/EU and
Nm 269/114
2011/65/EU. For more information, please contact D
mm 13
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
mm 172
kg 7.0
dB(A) 86
Markus Rompel
dB(A) 97
Vice President of Engineering, PTE-Europe
dB(A) 3
WALT, Richard-Klinger-Straße 11,
D
e
D-65509, Idstein, Germany
09.10.2018
m/s 3.5
2
m/s 1.5
2
Definitions: Safety Guidelines
m/s 3.6
2 The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
m/s 1.5
2
these symbols.





Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EnGLIsh
WALT at
e
WALT.
e
27