Onkyo DS-A1XP Manuel D'instructions page 8

Using the RI Dock
—Continued
Operating Notes:
• The RI Dock must be connected to your
AV receiver/amp with both an
and an audio cable to use the
tions.
• If your AV receiver/amp doesn't support
the System On, System Off, Auto Power
On, and Direct Change functions, you'll
need to turn your AV receiver/amp on
and off and select the input source man-
ually.
• Before you select another input source,
stop iPod playback to prevent your AV
receiver/amp from selecting the iPod
input source by mistake.
• If any accessories are connected to your
iPod, your AV receiver/amp may not be
able to select the input source properly.
• While your iPod is in the RI Dock, its vol-
ume control has no effect. If you adjust
your iPod's volume control while it's in the
RI Dock, make sure it's not set too high
before you reconnect your headphones.
■ Using Your iPod's Alarm Clock
You can use your iPod's Alarm Clock function to
automatically turn on your iPod and AV
receiver/amp at a specified time. Your AV
receiver/amp's input source will automatically
be set to the input to which your iPod is con-
nected.
Notes:
• To use this function, your iPod must be in
the RI Dock, and the RI Dock must be con-
nected to your AV receiver/amp with
both an cable and an audio cable.
• When you use this function, be sure to set
your AV receiver/amp's volume control to
a suitable level.
• Your AV receiver/amp may take several
seconds to startup, so you might not hear
the first few seconds of the first song.
8
En-
All manuals and user guides at all-guides.com
cable
func-
■ Charging Your iPod's Battery
The RI Dock charges your iPod's battery while
your iPod is in the RI Dock.
Notes:
• To charge your iPod battery, the AC
adapter must be plugged into a suitable
wall outlet and connected to the RI
Dock's DC IN jack.
• See your iPod's instruction manual for
more information on battery charging.