Onkyo DS-A1XP Manuel D'instructions page 10

Troubleshooting
■ There's no sound
• Make sure your iPod is actually playing.
• Make sure your iPod is inserted properly in the RI
Dock.
• Make sure the RI Dock is connected to the correct
input jacks on your AV receiver/amp. Do not con-
nect it to any output jacks.
• Make sure your AV receiver/amp is turned on, the
correct input source is selected, and the volume is
turned up.
• Make sure the plugs are pushed in all the way.
• Make sure the AC adapter is connected to a suit-
able wall outlet and connected to the RI Dock.
• Try resetting your iPod.
■ Your AV receiver/amp's remote controller
doesn't control your iPod
• 3rd generation iPod models are not supported.
• Make sure your iPod is properly inserted in the RI
Dock. If your iPod is in a case, it may not connect
properly to the RI Dock. Always remove your iPod
from the case before inserting it into the RI Dock.
• The iPod cannot be operated while it's displaying
the Apple logo.
• If your AV receiver/amp's remote controller has
remote mode buttons, make sure you've selected
the right mode.
• Check the RI Dock's RI MODE switch setting.
• When you use your AV receiver/amp's remote con-
troller, point it toward your AV receiver/amp.
• The RI Dock must be connected to your AV
receiver/amp with both an
cable.
• The TAPE IN on some amps can be set to TAPE, MD,
or CDR. Make sure the RI Dock's RI MODE switch
setting and the remote control mode match this
setting. See your amp's manual for more informa-
tion.
If you still can't control your iPod, start playback by
pressing your iPod's Play button. Remote opera-
tion should then be possible.
• Make sure your AV receiver/amp's remote control-
ler is set to the correct remote control ID.
10
En-
All manuals and user guides at all-guides.com
cable and an audio
■ Your AV receiver/amp unexpectedly
selects your iPod as the input source
• Always pause iPod playback when listening to
another component that's connected to your AV
receiver/amp. If playback is not paused, the Direct
Change function may select your iPod as the input
source by mistake when one track ends and
another starts playing.
Caution: If you use this product under
direct sunlight, fluorescent light, or germi-
cidal lamp, ultraviolet or another elements in
the light may change the product exterior
color.