Onkyo DS-A1XP Manuel D'instructions page 7

Using the RI Dock
Putting Your iPod in the RI Dock
1. Plug in the AC adapter.
2. Turn on your AV receiver/amp, and select
the appropriate inputs on your AV
receiver/amp.
3. Align your iPod with the RI Dock's iPod slot,
and carefully place your iPod in the slot, as
shown.
Remove your
iPod's case
■ Adjusting the iPod Adapter
The iPod adapter needs to be adjusted to
match your particular iPod. If there's a gap
between the back of your iPod and the adapter,
turn the adapter counterclockwise to close the
gap. Turning the adapter counterclockwise
moves it forward. Turning it clockwise moves it
backward.
Notes:
• To prevent iPod connector damage, don't
twist your iPod when inserting or remov-
ing it, and be careful not to knock over
the RI Dock while your iPod is inserted.
• Don't use the RI Dock with any other iPod
accessories, such as FM transmitters and
microphones, because they may cause a
malfunction.
All manuals and user guides at all-guides.com
Forward
Backward
Function Overview
■ Basic Operation
Note:
• Your AV receiver/amp may take several
seconds to startup, so you might not hear
the first few seconds of the first song.
• System On Function
When you turn on your AV receiver/amp, the
iPod turns on as well. With some AV receiv-
ers/amps, you may need to press the [ON] but-
ton on your AV receiver/amp's remote
controller's twice to turn on the other compo-
nents in your system.
• System Off Function
When you turn off your AV receiver/amp, the
iPod turns off as well.
• Auto Power On Function
If you start iPod playback while your AV
receiver/amp is on Standby, your AV
receiver/amp will automatically turn on and
select your iPod as the input source. Then, your
iPod will start playback.
• Direct Change Function
If you start iPod playback while listening to
another input source, your AV receiver/amp will
automatically select your iPod as the input
source.
• Timer Play
You can use your AV receiver/amp's Timer func-
tion to turn on your AV receiver/amp and iPod
and start playback at a specified time.
• Linked Dimmer Operation
When you use your AV receiver/amp's Dimmer
function to change its display's brightness, the
brightness of the RI Dock's Power indicator will
change as well.
• Using Your AV receiver/Amp's Remote
Controller
You can use your AV receiver/amp's remote
controller to control basic iPod functions (see
page 9).
*1. If you use your iPod's controls to start an iPod slideshow or
video, these functions will not work, so use the remote con-
troller instead.
*1
*1
7
En-