Onkyo DS-A1XP Manuel D'instructions page 6

Getting Started
—Continued
Hooking Up the RI Dock
Depending on the Onkyo AV receiver/amp that
you're using, choose connection method A or
B.
A: Connect the RI Dock's AUDIO OUT L/R jacks
to an RI Dock-compatible input on your
Onkyo AV receiver/amp. (You might need to
change the input display to "HDD" or
"DOCK.")
B: Connect the RI Dock's AUDIO OUT L/R jacks
to the TAPE (MD, CDR) IN jacks on your
Onkyo AV receiver/amp.
See your AV receiver/amp's instruction manual
for details.
Supplied
cable
-capable AV receiver/amp
1. Using the supplied AV cable, connect the RI
Dock's AUDIO OUT L/R jacks to a suitable
audio input on your AV receiver/amp.
The input you use depends on the type of
Onkyo AV receiver/amp you have. See your
AV receiver/amp's instruction manual for
details.
2. Using the supplied
RI Dock's jack to an
the Onkyo components in your system.
3. Connect the supplied AC adapter to the RI
Dock's DC IN jack.
6
En-
All manuals and user guides at all-guides.com
AC adapter
Wall outlet
Supplied AV cable
White
AUDIO
INPUT
L
R
Red
cable, connect the
jack on one of
Note: When the AC adapter is unplugged or
not connected to the RI Dock, the RI Dock
will output no sound,
work, and your iPod's battery will not be
charged.
Caution: Connect the supplied
only jacks. Do not connect headphones
to the jack, as it will damage your equip-
ment.
■ What to do if you already have a compo-
nent connected to your AV receiver/amp's
TAPE input or RI Dock-compatible input
Connect the RI Dock to an unused AV input on
your AV receiver/amp. However, you will not be
able to use any of the
functions will not
cable to
functions.