Lacor 69072 Conseils D'utilisation Et D'entretien page 22

ROUBLESHOOTING:
Symptoms
The wine cooler does
not work
Wine cooler is not
reaching the desired
temperature
Frost forming in the
wine cooler
1- Ensure the cooler is unplugged before cleaning or if the cooler is not in use.
2- To clean the cooler use only mild detergentsleaning products. Never use harsh detergents or
solvents.
3- It is not recommended to use this wine cooler with an extension cord or power board. Please
ensure that the appliance is plugged directly into the electrical outlet.
4- When positioning the wine cooler, ensure that there is at least a 5 cm clearance at the sides
and a 10 cm clearance at the back of the cooler as this is the main outlet for heat. This will allow
for adequate.
5- Close the cooler door immediately after putting in any items so the inside temperature will not
rise dramatically.
6- Keep appliance away from any heat source or direct sunlight.
7- The wine cooler is an electrical appliance. To avoid injury or death from electrical shock do not
operate the wine cooler with wet hands, while standing on a wet surface or while standing in
water.
8- Do not use outdoors or in wet conditions.
22
Possible cause
There is a power failure.
A house fuse has blown.
The cooler is placed too
close to a heat source.
No sufficient ventilation.
The door is opened too
frequently or for a long
period of time.
Too much humidity.
The ambient temperature
is too low.
MAINTENANCE & CLEANING
Solutions
Ensure the cooler is plugged
in and the power socket is
turnedon. Replace the broken
fuse in your meter box
Keep the cooler away from
sunshine or other heat sources.
Place the wine cooler in good
ventilation and keep any items away
from the fans. Close the door tightly
and do not open the door too
frequently or for a long period of
time.
Unplug to defrost, plug
again after the frost
thaws.