Lacor 69072 Conseils D'utilisation Et D'entretien page 21

1
2
3
4
5
6
7
1- Insert the power plug into the power socket. Make sure the power socket is 220/240V- AC/50 Hz.
2- Allow the empty wine cooler to operate for approx. one hour. This will allow the wine cooler to
reach the desired temperature.
3- Fill the refrigerator cabinet with a selection of wines. Wait 1-2 hours until they reach the desired
temperature.
Settin The Temperature Control
The temperature inside the winw cooler is dependant on the ambient temperature (room temp.)
outside the winw cooler. The refrigerator cabinet's temperature range can be found in the table on
page 4.
For red wines, we recommend a temperature range between 14-16ºC. For white wines or
Champaign, set the temperature between 8-10ºC. These values are based on a room
temperature of 25ºC.
The inside temperature can be altered by the temperature adjustor on the upper side of the inside
cabinet.
PARTS LIST
8
9
10
11
OPERATION
1- Temperature control knob.
2- Light switch
3- Light
4- Fan mask
5- Shelf
6- Foot
7- Watter box
8- Rean cover
9- Magnetic seal
10- Glass
11- Door frame
21