MODEL:
BOTLLES:
VOLUME:
TEMP.:
VOLTAGE:
CYCLE:
POWER:
CONSUMPTION:
SIZE:
GEWICHT:
Warranty Information
This manual provides the installation, safety and operating instructions for the thermoelectric wine
cooler. We recommend all installation, operating and safety instructions appearing in this manual
to be read before installation or operation.
Thermoelectric wine cooler is a product of extensive research and field testing. The materials used
were selected for maximum durability, attractive appearance and optimum performance. Every
unit is thoroughly inspected and tested before shipment.
IMPORTANT! Keep these instructions for future reference.
If the unit changes ownership, be sure this manual accompanies the equipment.
1- Plug thermoelectric wine cooler into a properly grounded electrical outlet of the correct voltage,
size, and plug configuration. If the plug and receptacle do not match, contact a qualified electrician
to determine the proper voltage and size, and install the proper electrical outlet.
2- To avoid any injury, turn the power switch off, unplug the unit from the power source and allow
to cool before performing any maintenance.
3- For safe and proper operation, the unit must be located at a reasonable distance from
combustible walls and materials.
4- Allow a minimum of 1" (2 cm) clearance along the sides. Allow a clearance of 20" (50 cm) along
the front and rear discharge to endure proper operation and safety.
5- To prevent any injury or damage do not pull unit by power cord.
SPECIFICATION
69078
8
25 Lts
8º-18ºC
220-240V
50-60 Hz
70W
1,7 Kw/24h
25x49x54 Cm.
9,40 Kgr.
WORTHY INFORMATION
WARNING
6971
16
46 Lts
12º-18ºC
220-240V
50-60 Hz
70W
1,7 Kw/24h
49x51x48 Cm.
15,40 Kgr.
69072
28
75 Lts
12º-18ºC
220-240V
50-60 Hz
80W
17,9 Kw/24h
46x73x53 Cm.
17,20 kgr.
19