MSI mS-7592 Mode D'emploi page 15

All manuals and user guides at all-guides.com
atX 24-Pin Power Connector: JPWR
this connector allows you to connect an atX 24-pin power supply. to connect
the atX 24-pin power supply, make sure the plug of the power supply is inserted
in the proper orientation and the pins are aligned. then push down the power
supply firmly into the connector.
atX 4-Pin Power Connector: JPWR2
this 4-Pin power connector is used to provide power to the CPu.
important
* make sure that all the connectors are connected to proper atX power sup-
plies to ensure stable operation of the mainboard.
Power supply of 350 watts (and above) is highly recommended for system
*
stability.
Floppy disk drive Connector: Fdd
this connector supports 360kB, 720kB, .2mB, .44mB or 2.88mB floppy disk
drive.
MS-7592
5