AEG Voxtel C110 Guide De Démarrage Rapide page 7

Press the store button
>The "minute" icon will be blinking.
Press the up or down button
Press the store button
>The display shows ‚ "SET 2 LCD", you can continue with programming, or press the delete button
to return to standby mode.
7.2 Set LCD contrast
In standby mode, press the store button
>The display shows "SET 1 DATE".
Press the up or down button
Press the store button
Press the up or down button
>The default setting is 4.
Press store button
>The display shows "SET 3 FLASH" you can continue with programming, or press the delete
button to return to standby mode.
7.3 Set flash time
This telephone gives you the possibility to use the special services of your network provider.
When pressing the recall button , the phone generates a line interruption and the length depends
on your flash time setting.
The default value is 100ms,which is correct for most exchanges and should not need changing, but if
the phone is connected to a PBX that requires a different timing, there are options for 300ms, 600ms
or 1000ms.
In standby mode, press the store button
>The display shows "SET 1 DATE".
Press the up or down button
Press the store button
Press the up or down button
>(default),300, 600, or 1000.
Press the store button
>The display shows "SET 1 DATE", you can continue with programming, or press the delete button
to return to standby mode.
8 TELEPHONE OPERATIONS
8.1 Making a call
Lift the handset or press the speakerphone button
>The display shows "00-00".
Dial the telephone number you wish to call.
>The display shows the number as you dial (maximum of 14 digits)
To end the call, return the handset to the base unit or press the speakerphone button
speakerphone is selected.
OR
you can pre-dial the number and check it on the display before dialling it.
Key in the telephone number you wish to call.
>The display shows the number as you dial, and if you make a mistake you can press the delete
button to delete the last digit.
All manuals and user guides at all-guides.com
to confirm.
to set the minute.
to confirm the setting.
.
until the display shows "SET 2 LCD".
to confirm.
to select your comfortable display viewing level (1~8).
to confirm the setting.
.
until the display shows "SET 3 FLASH".
to confirm.
to select 100.
to confirm the setting.
and listen for a dial tone.
7
if