APEX FORGE M6 Pro Mode D'emploi page 16

Shield Rotary Tool Attachment
The rotary shield attachment provides a clear and simple solution for
redirecting debris and sparks away from the user without interfering with
the task at hand. The tool shield can be used with right-hand or left-hand
grip positions and works to deflect debris on a variety of applications,
including cutting, sanding, grinding and polishing. The shield can be quick-
ly adjusted into position, provides easy access to the accessory without
interfering with the workpiece.
Installation Instructions:
Step 1. Remove the housing cap A from the end of the tool and set housing
cap aside. The original housing cap must be reinstalled when this attach-
ment is not used (Fig.1).
Step 2. Screw the Shield onto the tool using the lock nut B (Fig.2).
Step 3. Position the Shield such that it will redirect debris, sparks, and dust
away from the user using the positioning tabs C (Fig.3).
Using the Shield Rotary Tool Attachment:
Always turn the tool off before adjusting position, changing accessory and
removing attachment. Rotary Tools cut, sand, grind, and polish in many
directions. To accommodate the Rotary Tool's Maneuverability, the Shield
can be quickly positioned and repositioned with a turn to the right or left .To
extend the life of the Shield periodically clean with a soft bristle brush or
compressed air.
Fig.1 Fig.1
A
Fig.3 Fig.3
C
Fig.2
C
- 14 -
B