Publicité
MONTAGE STEPS
1. Press and hold down the round button and extend the leg then release the round button.
2. Press the button then press down the tray arm.
3. Take out the front and rear feet, turn the highchair upside down. Push firmly on the foot at
either end until each of the two sprung pins click into place within the small hole in the foot.
Repeat for the other foot.
4. Position the tray to the front of the arms, pull the front lever on the underside of the tray,
whilst slide the tray along with the slot to the position required. The tray has three positions as
indicated on the arm rests.
5. A five-point safety harness is provided to restrain your child and should always be worn.To
unfasten, push the button on the buckle and pull the clips clear. To fasten, push the waist strap
slips into the buckle until they lock in place. Sliding adjusters are fitted on the shoulder straps
and waist straps. The harness should be carefully adjusted so that it fits your child comfortably.
6. Press the button then adjust the chair in the suitable position. 6 heights for choice.
7. To adjust the angle of the seat, lift the plastic lever on the back of seat, and position as required,
release the mechanism to secure into place.
8. To adjust the footrest, push in both sides of button and simultaneously raise or lower the
footrest, release both buttons at the required position.
9. Release the levers to a required lock position until a double click is heard signalling the tray is
securely locked.
10. Insert the wheels on the bottom of legs.
11. Apply the stop function on the wheel to keep highchair stop in position.
HOW TO FOLD THE CHAIR: Adjust the backrest of the highchair to the vertical state and the
highchair in the highest position. Remove the tray and place the tray in the slot position
under the hind legs. Pull the tray arm upwards. Press the button then fold the highchair as
shown in the illustration. Make sure the highchair fold properly then store it in a suitable place.
Publicité
