Publicité
Notice d'assemblage ECblue
UKCA Declaration of Incorporation
11.4
as defined by the Supply of Machinery (Safety)
Regulations 2008
No. 1597, PART 2 / Annex II B
The design of the incomplete machine:
Axial fan DN.., FA.., FB.., FC.., FE.., FF.., FG.., FH.., FL.., FN.., FS.., FT.., FV.., VN.., VR.., ZC.., ZF..,
ZG.., ZN..Centrifugal fan ER.., GR.., HR.., RA.., RD.., RE.., RF.., RG.., RH.., RK.., RM.., RR.., RZ..,
WR..Cross-flow fan QD.., QG.., QK.., QR.., QT..,
The motor type:
Asynchronous internal or external rotor motor (also with integrated frequency inverter)Electronically
commutated internal or external rotor motor (also with integrated EC controller)
complies with the requirements in Annex I, Articles 1.1.2, 1.1.5, 1.4.1, 1.5.1 in Supply of
Machinery (Safety) Regulations 2008 No. 1597.
The manufacturer is
The following harmonised standards have been used:
EN 60204-1:2018
EN ISO 12100:2010
EN ISO 13857:2008
Note:
The specific technical documentation in accordance with Annex VII B has been written and is
available in its entirety.
The person authorised for compiling the specific technical documentation is: Mr. Tobias Gauss,
address see above.
The specific documentation will be transmitted to the official authorities on justified request. The
transmission can be electronic, on data carriers or on paper. All industrial property rights remain with
the above-mentioned manufacturer.
L-BAL-F055D-F 2021/51 Index 006
ZIEHL-ABEGG SE
Heinz-Ziehl-Strasse
D-74653 Kuenzelsau
Safety of machinery; electrical equipment of machines; Part
1: General requirements
Safety of machinery - General principles for design - Risk
assessment and risk reduction
Safety of machinery; safety distances to prevent danger
zones being reached by the upper limbs
The maintenance of the EN ISO 13857:2008 relates only to
the installed accidental contact protection, provided that it is
part of the scope of delivery.
Part.-No.
54/57
Annexe
- Original -
(english)
ZA87_UK-GB
2021/40 Index 001
Publicité
