Publicité
Les langues disponibles
Les langues disponibles
TANDEM TRAILER
KIT PN 2878231
9. Position and fasten the rear panel assembly (#3) onto the box using the
screws (#18), the
(2) 8.4mm I.D. X 17mm O.D. X 1.6mm (zinc plated)
the
nylock flange nuts (#16). NOTE: To allow rear panel to flip, do not overtighten.
(2) M8-1.25
Tighten firmly all machine screws and nuts installed in step 8.
10. Position and fasten the
machine screws (#17) and the
7510316
A-7510316 Rév. B
corner reinforcements (#12) onto the box using the
(2)
nylock flange nuts (#16). Tighten firmly.
(4) M8-1.25
(2) M8-1.25 X 25mm
flat washers (#20), the
- 7 -
Allen socket machine
nylon shims (#24), and
(2)
Allen socket
(4) M8-1.25 X 20mm
Imprimé en Chine / Printed in China
Publicité
